How to Remove and Replace on a Driver Side Exhaust Manifold on a Jeep Wrangler JK/JKU (3.8L Motor)

Left Side (Driver Side) Exhaust Manifold Replacement on a Jeep Wrangler JK or JKU (3.8L Motor)

Applies to 2007-2011 Jeep Wrangler (JK/JKU)

Exhaust Manifold Replacement Mopar PN: 4666024AD
Exhaust Manifold Gasket Replacement FelPro PN: MS 96908

Tools Recommended:
10″ Vise Grips
3/8″ Drive – Inch lb Torque Wrench
3/8″ Drive Ratchet
3/8″ Drive 14″ extension
3/8″ Drive 3″ extension
3/8″ Drive 10mm Socket
3/8″ Drive 11mm Socket
3/8″ Drive 15mm Socket
15mm Open/Box Wrench

Torque Specifications:
Exhaust Manifold to Head Bolts (10mm) – 200 in lbs or 16 ft lbs
Exhaust Manifold to Exhaust Pipe Flange Bolts (15mm) – 360 in lbs or 30ft lbs

Additional Items needed as required:
Manifold to Head Bolts – AutoZone PN: 03413
Manifold to Exhaust Flange Bolts and Nuts – Match the bolts at the hardware store

Leave a Reply