Explanation of what you need to do to actually be able to remove your freedom top panels and hardtop. Bolts to remove, levers to move, latches to unlatch, connectors to disconnect, etc.. This video has a hoist system which is used. Manual removal is explained as well.Shout outs to https://www.facebook.com/IG4wlusa/, https://www.sevenslotsociety.com/, http://onthetrailpodcast.com/ w/Kevin and Scott. …
So easy a Jeeper Figured it out. What is Wheel Offset and Backspace? Wheel offset and backspacing two different ways of looking at same thing. Determines the location of the wheel and tire assembly when bolted onto the wheel hub. They determine how far in or out the wheel and tire sit. Why is it …
Read more “Keep It Simple, a Guide for Wheel Backspace and Offset”
Front ends shakes, wobbles, shimmies and the dreaded Death Wobble. These have been going on since steering was invented and has worsened with the incorporation of coil spring suspensions. Prevention is the key to any well maintained Jeep. Preventive Maintenance and Routine Inspections and not of just the Stereo Equipment. We used a Floor Jack, …
Read more “Death Wobble Prevention – A Simple and Effective Suspension Inspection”
Parts Recommended:Upper and Lower Intake Gaskets – MS97204Oil Filter/Cooler Housing – 68105583AE Tools Required: 8mm Socket 10mm Socket Ratchet 3” and 6” extensions Body Clip Tool T20 Torx T30 Torx E8 (External) Torx Small flat tip screwdriver Standard Pliers Wide Tape to cover intake ports Brake Cleaner or similar, to clean intake and oil filter/cooler …