Simple and Complete 1988 Jeep Cherokee (XJ) Shop Manual
This Shop Manual should work for 1984-1996 Jeep Cherokee (XJ) also and possibly other Jeep models
How to Do It fabricate your own Starter Heat Shielding
I had to fabricate a heat shield because mine on my JKU was missing. I had to replace the starter because of heat damage, it is about ¾” from a catalytic converter. This is the heat barrier which has adhesive on the back and what I used to protect the metal I used for the …
Read more “How to Do It fabricate your own Starter Heat Shielding”
Iron Rock Off-road Control Arm Adjustment Jeep Wrangler JKU
This is specifically for Iron Rock Offroad Adjustable Control Arms – After installation and testing has occured, it is time to adjust for better performance. This process is similar for most adjustable control arms, clamping nuts and bolts may differ but the procedure is the same.
How to Remove and Replace on a Driver Side Exhaust Manifold on a Jeep Wrangler JK/JKU (3.8L Motor)
Left Side (Driver Side) Exhaust Manifold Replacement on a Jeep Wrangler JK or JKU (3.8L Motor) Applies to 2007-2011 Jeep Wrangler (JK/JKU) Exhaust Manifold Replacement Mopar PN: 4666024AD Exhaust Manifold Gasket Replacement FelPro PN: MS 96908 Tools Recommended: 10″ Vise Grips 3/8″ Drive – Inch lb Torque Wrench 3/8″ Drive Ratchet 3/8″ Drive 14″ extension …
Do It Yourself – How to Remove and Replace the Water Pump on a Jeep Wrangler JK / JKU 3.8L Motor
This procedure applies to 2007-2011 Jeep Wrangler (JK/JKU) with a 3.8l V-6 Motor Parts Used:Water Pump Replacement Mopar PN: 4666044BB.0Water Pump Gasket Replacement Mopar PN: 4666068AA Tools Recommended: Wire Brush Gasket Scraper Small Pry Bar 3/8″ Drive – Inch lb Torque Wrench 3/8″ Drive Ratchet 3/8″ Drive Breaker Bar 3/8″ Drive 10mm Socket 3/8″ Drive …
Do It Yourself – How to Remove and Replace a Hub Bearing on a 2007 – 2020 Jeep Wrangler Unlimited
This is the removal and replacement of a 2009 JKU Passenger side Hub Bearing. This video starts after you have already raised the Jeep and supported it properly with jack stands and removed the tire. This procedure should work for many other years and models of Jeep. 1987-2018. There will be slight variations in the …
Do It Yourself Video – Simple How to on Relocation of your Fuel Evaporator Canister on a 2007 – 2018 Jeep Wrangler JK or Unlimited
This is a How To video on “one” procedure for relocating your evap canister on a 2007-2011 Jeep Wrangler JKU. This solves the issue of bolts sticking thru the bottom of the back trunk area of the Jeep. I used flat headed beveled shoulder bolts with hex head with a lock nut and a flat …
Do It Yourself – How to Replace a Starter on your Jeep Wrangler JK or Unlimited
Procedures on how to remove and replace your starter on a 2007-2011 Jeep Wrangler JK / JKU, This procedure is very similar on all Jeep Wrangler Models and early Model Jeeps Tools 3/8″ Ratchet 3/8″ 13mm socket 3/8″ 15mm socket 3/8″ 16mm socket 3/8″ 6″ Long extension 3/8″ Universal Swivel adapter Parts Used: CarQuest Starter …
Read more “Do It Yourself – How to Replace a Starter on your Jeep Wrangler JK or Unlimited”
Do It Yourself – How to Replace the Idler Pulley and Belt on your 2007 – 2011 Jeep Wrangler
Removal and Replacement of the Idler Pulleys and Serpentine Belt in a Jeep Wrangler (2007-2011) Replacing the Idler Pulley, Tensioner Pulley and Serpentine Belt on a 2007-2011 Jeep JK or JKU Tools 3/8″ Ratchet or breaker bar 13mm socket 16mm socket Parts: With A/C Serpentine Belt – PN: K060900 Tensioner w/Pulley – PN: 39269 Idler …
Do It Yourself – How To Jeep Wrangler JK / JKU Fender Flares And Inner Liners
Jeep Wrangler JK/JKU Fender Flares (Deegan 38) and Inner Liners (DV8) Using the instructions provided, always read those. Measure twice and drill once. Here is a fairly short video on how to install these Flares and liners.