Water Pump

Do It Yourself – How to Remove and Replace the Water Pump on a Jeep Wrangler JK / JKU 3.8L Motor

This procedure applies to 2007-2011 Jeep Wrangler (JK/JKU) with a 3.8l V-6 Motor Parts Used:Water Pump Replacement Mopar PN: 4666044BB.0Water Pump Gasket Replacement Mopar PN: 4666068AA Tools Recommended: Wire Brush Gasket Scraper Small Pry Bar 3/8″ Drive – Inch lb Torque Wrench 3/8″ Drive Ratchet 3/8″ Drive Breaker Bar 3/8″ Drive 10mm Socket 3/8″ Drive …

Hub Bearing

Do It Yourself – How to Remove and Replace a Hub Bearing on a 2007 – 2020 Jeep Wrangler Unlimited

This is the removal and replacement of a 2009 JKU Passenger side Hub Bearing. This video starts after you have already raised the Jeep and supported it properly with jack stands and removed the tire. This procedure should work for many other years and models of Jeep. 1987-2018. There will be slight variations in the …

Evap Relocation

Do It Yourself Video – Simple How to on Relocation of your Fuel Evaporator Canister on a 2007 – 2018 Jeep Wrangler JK or Unlimited

This is a How To video on “one” procedure for relocating your evap canister on a 2007-2011 Jeep Wrangler JKU. This solves the issue of bolts sticking thru the bottom of the back trunk area of the Jeep. I used flat headed beveled shoulder bolts with hex head with a lock nut and a flat …

Starter

Do It Yourself – How to Replace a Starter on your Jeep Wrangler JK or Unlimited

Procedures on how to remove and replace your starter on a 2007-2011 Jeep Wrangler JK / JKU, This procedure is very similar on all Jeep Wrangler Models and early Model Jeeps Tools 3/8″ Ratchet 3/8″ 13mm socket 3/8″ 15mm socket 3/8″ 16mm socket 3/8″ 6″ Long extension 3/8″ Universal Swivel adapter Parts Used: CarQuest Starter …

Pulley and Belt

Do It Yourself – How to Replace the Idler Pulley and Belt on your 2007 – 2011 Jeep Wrangler

Removal and Replacement of the Idler Pulleys and Serpentine Belt in a Jeep Wrangler (2007-2011) Replacing the Idler Pulley, Tensioner Pulley and Serpentine Belt on a 2007-2011 Jeep JK or JKU Tools 3/8″ Ratchet or breaker bar 13mm socket 16mm socket Parts: With A/C Serpentine Belt – PN: K060900 Tensioner w/Pulley – PN: 39269 Idler …

It' a Jeep World Garage

Jeep Wrangler Front Shock Removal and Replacement

How to remove and replace your front shocks on most Jeeps, specifically a 2007-2011 Jeep Wrangler JKU. This procedure is very similar for all Jeep Wranglers. Top Nut 14mm wrench 7mm wrench to hold the shock strut so it doesn’t turn. Bottom Bolt and Nut 18mm Wrench and socket

Do It Yourself – How to JK/JKU Ball Joint Replacement

JK/JKU Ball Joint Replacement DIY     JK and JKU Ball joints are prone to wear and tear/abuse as soon as you lift the Jeep and add big tires. This procedure uses Teraflex Adjustable ball joints, the basic procedure for removal and installation are the same. Slight differences on the lower installation and adjustment, as …