JKU Draglink End Remove and Replace

Do It Yourself – How to Remove and Replace a Drag Link End on a Jeep Wrangler

Transcript 00:15 okay so our next little job tie rod end   00:20 the tie rod end   00:24 you can go on the end of the drag link   00:26 at the pitman arm or either side of the   00:32 tie rod and it’s normally this this part   00:36 right here is …

Flag Pole Hitch Set-Up

Easy Hitch Flag Pole

Here is a simple, but strong set-up for a flag pole hitch for about $60.  No Drilling involved.  About 15 minutes to set-up.   Shopping List 1 Camco Hitch Mount Flagpole Holder, Fits Standard 2-Inch Hitch Receivers, Durable and Rust Resistant 1 Black Steel Chain Link Fence Line Post 2 3/8″ 6ft 1 Black Dome Cap …

Jeep JKU Rear Shock Install

Do It Yourself – How To Jeep JKU Rear Shock Install

    Video Transcript   00:00 all right so here we go again tonight 00:03 we’re doing shocks this is a rear shock 00:06 for my JK you back here Jake through 00:10 there 00:11 Deutsche Tech shocks gonna stick around 00:15 here somewhere 00:16 Deutsch deck there from iron Rock 00:22 off-road in Minnesota …

Rear 021

Do It Yourself – How To Accomplish Effective Rear Axle Maintenance

This write up will encompass a few different component removal procedures. Prior to any procedure I will not show you how to lift your Jeep, properly place jack stands to support the Jeep or how to remove your wheels/tires. If you cannot perform this simple task, you should stop reading this now.   Coverage: Removing …