How to remove and replace your front shocks on most Jeeps, specifically a 2007-2011 Jeep Wrangler JKU. This procedure is very similar for all Jeep Wranglers. Top Nut 14mm wrench 7mm wrench to hold the shock strut so it doesn’t turn. Bottom Bolt and Nut 18mm Wrench and socket
Transcript 00:00 all right so what we got is tonight I’m 00:04 putting together a iron rock off-road 00:09 adjustable track bar with a flex there 00:14 flex joint which looks like this 00:20 typical 14 millimeter hole for the JK 00:25 track bar front and rear plastic combs 00:30 that the Flex joint fits …
Transcript 00:15 okay so our next little job tie rod end 00:20 the tie rod end 00:24 you can go on the end of the drag link 00:26 at the pitman arm or either side of the 00:32 tie rod and it’s normally this this part 00:36 right here is …
Read more “Do It Yourself – How to Remove and Replace a Drag Link End on a Jeep Wrangler”
Video Transcript 00:00 all right so here we go again tonight 00:03 we’re doing shocks this is a rear shock 00:06 for my JK you back here Jake through 00:10 there 00:11 Deutsche Tech shocks gonna stick around 00:15 here somewhere 00:16 Deutsch deck there from iron Rock 00:22 off-road in Minnesota …
Read more “Do It Yourself – How To Jeep JKU Rear Shock Install”
This write up will encompass a few different component removal procedures. Prior to any procedure I will not show you how to lift your Jeep, properly place jack stands to support the Jeep or how to remove your wheels/tires. If you cannot perform this simple task, you should stop reading this now. Coverage: Removing …
Read more “Do It Yourself – How To Accomplish Effective Rear Axle Maintenance”